HIKVISION DS-7200-SH Скачать руководство пользователя страница 162

Страница: 162 / 188

User Manual of DS-7200-SH/SV/SL and DS-7300/8100-SH Series DVR

160

11.2 Configuring Privacy Mask

Purpose:

You are allowed to configure the four-sided privacy mask zones that cannot be viewed by the operator.

Steps:

Enter the Privacy Mask Settings interface.

Menu > Camera > Privacy Mask

Select the camera to set privacy mask.

Click the checkbox of

Enable Privacy Mask

to enable this feature.

Figure 11.3 Privacy Mask Settings Interface

Use the mouse to draw a zone on the window. The zones will be marked with different frame colors.

Note:

Up to 4 privacy mask zones can be configured, and the size of each area can be adjusted.

The configured privacy mask zones on the window can be cleared by clicking the corresponding Clear

Zone1-4 icons on the right side of the window, or click

Clear All

to clear all zones.

Figure 11.4 Set Privacy Mask Area

You can click the

Copy

button to copy the privacy mask settings of the current camera to other cameras.

Please refer to step 7 of

Chapter 11.1 Configuring OSD Settings

Click the

Apply

button to save the settings.

Note:

You can also click the

Restore

to restore the current OSD settings to the default parameters.

Содержание DS-7200-SH





























































































































































































Результаты поиска

Содержание DS-7200-SH

Отзывы:

HIKVISION DS-7200-SH, Руководство пользователя, Страница: 162 / 188

Результаты поиска

Содержание DS-7200-SH

Отзывы: