HIKVISION DS-7200-SH Скачать руководство пользователя страница 117

Страница: 117 / 188

User Manual of DS-7200-SH/SV/SL and DS-7300/8100-SH Series DVR

115

Figure 8.9 Set Arming Schedule of Alarm Input

If necessary, select

PTZ Linking

tab and set PTZ linkage of the alarm input.

Set PTZ linking parameters and click

Apply

to save the settings. Click

to complete the settings of

the alarm input.

Note:

Please check whether the PTZ or speed dome supports PTZ linkage.

One alarm input can trigger presets, patrol or pattern of more than one channel. But presets, patrols and

patterns are exclusive.

Figure 8.10 Set PTZ Linking of Alarm Input

If you want to set handling method of another alarm input, repeat the above steps or just copy the above

settings to it by clicking

Copy

in Alarm Input Settings interface.

Содержание DS-7200-SH





























































































































































































Результаты поиска

Содержание DS-7200-SH

Отзывы:

HIKVISION DS-7200-SH, Руководство пользователя, Страница: 117 / 188

Результаты поиска

Содержание DS-7200-SH

Отзывы: