HIKVISION DS-7200-SH Скачать руководство пользователя страница 114

Страница: 114 / 188

User Manual of DS-7200-SH/SV/SL and DS-7300/8100-SH Series DVR

112

Set up arming schedule of the channel.

1) Select

Arming Schedule

tab to set the channel’s arming schedule.

2) Choose one day of a week and up to eight time periods can be set within each day.

3) Click

Apply

to save the arming settings of the selected day.

4) Repeat the above steps to set up arming schedule of other days of a week. You can also use

Copy

button to copy an arming schedule to other days.

Note:

Time periods shall not be repeated or overlapped.

Figure 8.4 Set Arming Schedule of Motion Detection

Click

Handling

tab to set up alarm response actions of motion alarm (please refer to

Chapter 8.6

Figure 8.5 Set Alarm Response Actions of Motion Detection

Note:

The Trigger Alarm Output option is available for DS-7224/7232-SH, DS-7300-SH and

DS-8100-SH models only.

Click

to complete the motion detection settings of the channel.

If you want to set up motion detection for another channel (s), repeat the above steps or copy the above

settings to the channel (s).

Note:

You are not allowed to copy the “Trigger Channel” action.

Содержание DS-7200-SH





























































































































































































Результаты поиска

Содержание DS-7200-SH

Отзывы:

HIKVISION DS-7200-SH, Руководство пользователя, Страница: 114 / 188

Результаты поиска

Содержание DS-7200-SH

Отзывы: