HIKVISION DS-7200-SH Скачать руководство пользователя страница 104

Страница: 104 / 188

User Manual of DS-7200-SH/SV/SL and DS-7300/8100-SH Series DVR

10
2

Figure 7.13 Result of Event Search

Select record files to export. You can use the following two ways to enter the Export interface.



Select motion detection event (s) from the list and click

Quick Export

button to enter the Export

interface, as shown in Figure 7.14.



(1) Click the

Details

button to enter the interface with detailed information of the record file, e.g.,

start time, end time, file size, etc.

Note:

The size of the currently selected files is displayed in the lower-left corner of the window.

(2) Select record file (s) from the list and click

Export

button to enter the Export interface, as

shown in Figure 7.14.

Figure 7.14 Event Details Interface

Export the selected record files.

Click the

Export

button and start backing up.

Note:

If the inserted USB device is not recognized:

•

Click the Refresh button.

•

Reconnect device.

•

Check for compatibility from vendor.

Содержание DS-7200-SH





























































































































































































Результаты поиска

Содержание DS-7200-SH

Отзывы:

HIKVISION DS-7200-SH, Руководство пользователя, Страница: 104 / 188

Результаты поиска

Содержание DS-7200-SH

Отзывы: