HIKVISION DS-7200-SH Скачать руководство пользователя страница 100

Страница: 100 / 188

User Manual of DS-7200-SH/SV/SL and DS-7300/8100-SH Series DVR

7.1.2 Backing up by Normal Video Search

Purpose:

The record files can be backup to various devices, such as USB devices (USB flash drives, USB HDDs, USB

writer), SATA writer or eSATA HDD.

Note:

The eSATA writer is supported by DS-7300-SH and DS-8100-SH models only.

Backup using USB flash drives, USB HDDs, USB writer, SATA writer or eSATA HDD.

Steps:

Enter Export interface.

Menu>Export>Normal

Figure 7.5 Normal Video Search for Backup

Set search conditions and click

Search

button to enter the search result interface.

Select record files you want to back up.

Click button

to play the record file if you want to check it.

Check the checkbox before the record files you want to back up.

Note:

The size of the currently selected files is displayed in the lower-left corner of the window.

Содержание DS-7200-SH





























































































































































































Результаты поиска

Содержание DS-7200-SH

Отзывы:

HIKVISION DS-7200-SH, Руководство пользователя, Страница: 100 / 188

Результаты поиска

Содержание DS-7200-SH

Отзывы: