HIKVISION DS-7108HI series Скачать руководство пользователя страница 60

Страница: 60 / 108

5.12 Recording Setup

In main menu, there is an icon named “Recording”. You can enter into recording menu as

following:

Fig 5.20 Recording channel configuration

“Recording” menu description:

If HDD Full:

There are two options: “Overwrite” and “Stop recording”. If you select

“Overwrite” option, when all HDDs in DVR are full, DVR will overwrite the earliest recorded

files and continue recording. If you select “Stop recording” option, when all HDDs are all full,

DVR will handle it as “Hard Disk Full” exception, please refer to chapter 5.17 for exception

menu.

Select Camera:

Here all channels are listed. You can use

【↑】【↓】

keys to select one.

Stream Type:

There are two options, one is “Audio&Video” stream and the other is “Video”

stream only. If you want to record video and audio, please select “Audio&Video” option,

otherwise you can select “Video” option to record only video. For DS-8000HSI DVR, there is

only one “Video” option.

Note: If you change this option, please reboot DVR to make parameter into effective.

Resolution:

The higher resolution is, the clearer the image is. The resolution options from

low to high are: QCIF, CIF

Содержание DS-7108HI series













































































































Результаты поиска

Содержание DS-7108HI series

Отзывы:

HIKVISION DS-7108HI series, Руководство пользователя, Страница: 60 / 108

Результаты поиска

Содержание DS-7108HI series

Отзывы: