manualshive.com logo in svg

HIKVISION DS-7104NI-Q1, Руководство пользователя, Страница: 60 / 93

Поделиться
Скачать
HIKVISION DS-7104NI-Q1 Скачать руководство пользователя страница 60

Device ID

The Device ID shall be provided by the platform.

Version

ISUP protocol version, only V5.0 is available.

Encryption Password

Encryption password is required when using ISUP V5.0 version, it provides more secure

communication between the device and platform. Enter it for verification after the device is

registered to the ISUP platform.

5. Click Apply to save the settings and restart the device.
What to do next

You can see the online status (online or offline) after the device is restarted.

6.2.6 Guarding Vision

Go to Configuration → Network → Platform Access . Refer to Guarding Vision for details.

6.3 Camera Management

6.3.1 Network Camera

Add Automatically Searched Online Network Camera

Add the network cameras to your video recorder.
Before You Start
• Ensure your network camera is on the same network segment with your video recorder.

• Ensure the network connection is valid and correct.

• Ensure the network camera password is the same as your video recorder.
Steps

1. Go to Configuration → Camera → Camera → IP Channel .

2. Click Online Device List. The online cameras on the same network segment will be displayed in

the list.

Network Video Recorder User Manual

46

Содержание DS-7104NI-Q1






























































































Отзывы:

Нет отзывов