HIKVISION DS-6500DI-T Скачать руководство пользователя страница 39 | Manualshive

Страница: 39 / 54

HIKVISION DS-6500DI-T Скачать руководство пользователя страница 39

User Manual of DS-6500DI–T Universal Network Decoder

38

4.5 Rebooting, Upgrading and Restoring the

Default Settings for the Decoder

Steps:

1.

To reboot, upgrade or restore the default settings of the decoder, go to the

Device Management

interface.

2.

Choose the configuration items in the left part of the page.

To upgrade the decoder

:

1)

Click the

icon to enter the interface, see the following figure.

2)

Click

Browse

to search the upgrading files.

3)

Click

Upgrade

to upgrade it

.

Figure 4.43 Device Management

Notes:

1.

When logging in to the device for the first time, please install the plug-in according to the prompt on the

screen.

2.

The device will restart after the upgrade is complete.

To restore the default settings of the decoder

:

1)

Click

icon to enter the Restore Default interface.

2)

Click

Complete

to restore the completed factory settings of the decoder.

Or

Click

Simple

to restore just a part of the factory settings of the decoder.

«
...
37
38
39
40
41
...
»

Содержание DS-6500DI-T























































Отзывы:

Нет отзывов