HIKVISION DS-3E15 P Series, Руководство пользователя, Страница: 17 / 26

Chapter 5 Network Configuration
In Network interface, you can configure basic parameters as neeeded.
Go to → Network → General to configure NIC type, IPv4 address, subnet mask, default gateway,
MAC address, device port and HTTP port No..
Figure 5-1 Network Configuration
Note
After the IPv4 address is reset, the device IP may not be in the same network segment as the
computer IP of the client, so it cannot be configured and managed. It is recommended to use the
SADP tool to plan the IP address of the device when the device is activated for the first time.
Gigabit PoE Switch Client User Manual
9