background image

Safety Instruction

Danger

• This is a class A product and may cause radio interference in

which case the user may be required to take adequate

measures.

• Ensure that your devices powered via the PoE port have their

shells protected and fire-proofed, because the switches are not

compliant with the Limited Power Source (LPS) standard.

• In the use of the product, you must be in strict compliance with

the electrical safety regulations of the nation and region.

• The socket-outlet shall be installed near the device and shall be

easily accessible.

• The device must be connected to an earthed mains socket-

outlet.

• Install the device according to the instructions in this manual.

 indicates hazardous live and the external wiring connected

to the terminals requires installation by an instructed person.

• Keep body parts away from fan blades. Disconnect the power

source during servicing.

• Never place the device in an unstable location. The device may

fall, causing serious personal injury or death.

• This device is not suitable for use in locations where children

are likely to be present.

• CAUTION: Risk of explosion if the battery is replaced by an

incorrect type.

• Improper replacement of the battery with an incorrect type

may defeat a safeguard (for example, in the case of some

lithium battery types).

• Do not dispose of the battery into fire or a hot oven, or

mechanically crush or cut the battery, which may result in an

explosion.

• Do not leave the battery in an extremely high temperature

surrounding environment, which may result in an explosion or

the leakage of flammable liquid or gas.

• Do not subject the battery to extremely low air pressure, which

may result in an explosion or the leakage of flammable liquid

or gas. Dispose of used batteries according to the instructions.

Caution

• CAUTION: Double pole/Neutral fusing. After operation of the

fuse, parts of the device that remain energized might represent

a hazard during servicing.

• The device has been designed, when required, modified for

connection to an IT power distribution system.

• This device is suitable for mounting on concrete or other non-

combustible surface only.

• The ventilation should not be impeded by covering the

ventilation openings with items, such as newspapers, table-

cloths, curtains, etc. The openings shall never be blocked by

placing the device on a bed, sofa, rug or other similar surface.

vi

Содержание DS-3E1 P Series

















Отзывы: