HIKVISION DS-2XE6146F-HS Скачать руководство пользователя страница 80

Страница: 80 / 176

Network Camera User Manual

Click the

Save

button to save the settings.

Configuring QoS Settings

Purpose:

QoS (Quality of Service) can help solve the network delay and network congestion by

configuring the priority of data sending.

Steps:

Enter the QoS Settings interface:

Configuration > Network > Advanced

Settings > QoS

QoS Settings

Configure the QoS settings, including Video/Audio DSCP, Event/Alarm DSCP

and Management DSCP.

The valid value range of the DSCP is 0 to 63. The bigger the DSCP value is, the

higher the priority is.

Note:

DSCP refers to the Differentiated Service Code Point; and the DSCP value

is used in the IP header to indicate the priority of the data.

Click

Save

to save the settings.

Note:

A reboot is required for the settings to take effect.

Configuring 802.1X Settings

Purpose:

The IEEE 802.1X standard is supported by the network cameras, and when the feature

is enabled, the camera data is secured and user authentication is needed when

Содержание DS-2XE6146F-HS

















































































































































































Результаты поиска

Содержание DS-2XE6146F-HS

Отзывы:

HIKVISION DS-2XE6146F-HS, Руководство пользователя, Страница: 80 / 176

Результаты поиска

Содержание DS-2XE6146F-HS

Отзывы: