HIKVISION DS-2XE6146F-HS, Руководство пользователя, Страница: 67 / 176

Network Camera User Manual
55
You can set the port No. of the camera, e.g., HTTP port, RTSP port and HTTPS port.
Steps:
1.
Enter the Port Settings interface, Configuration > Network > Basic Settings >
Port
Port Settings
2.
Set the HTTP port, RTSP port, HTTPS port and server port of the camera.
HTTP Port : The default port number is 80, and it can be changed to any port No.
which is not occupied.
RTSP Port: The default port number is 554 and it can be changed to any port No.
ranges from 1 to 65535.
HTTPS Port: The default port number is 443, and it can be changed to any port
No. which is not occupied.
Server Port: The default server port number is 8000, and it can be changed to
any port No. ranges from 2000 to 65535.
3.
Click Save to save the settings.
Note: A reboot is required for the settings to take effect.
Configure NAT (Network Address Translation) Settings
Purpose:
NAT interface allows you to configure the UPnP™ parameters.
Universal Plug and Play (UPnP™) is a networking architecture that provides
compatibility among networking equipment, software and other hardware devices.