HIKVISION DS-2TD8166-180ZE2F-V2, Руководство пользователя, Страница: 38 / 143

User Manual of Thermal Network Positioning system
© Hikvision
30
Figure 4-12 Patterns Settings Interface
3. Click to enable recording the panning, tilting and zooming actions.
4. Use the PTZ control buttons to move the lens to the desired position after the
information of PROGRAM PATTERN REMAINNING MEMORY(%) is displayed on the
screen.
 Pan the positioning system to the right or left.

Tilt the positioning system up or down.
 Zoom in or out.

Refocus the lens.
5. Click to save all the pattern settings.

Buttons on the Patterns interface:
Buttons Description
Start the selected patrol/pattern.
Stop current patrol/pattern.
Set the selected preset/patrol.
Delete the selected preset/patrol/pattern.
Start recording a pattern.
Stop recording the pattern.

These 4 patterns can be operated separately and with no priority level.

When configuring and calling the pattern, proportional pan is valid; the limit stops and
auto flip will be invalid; and the 3D positioning operation is not supported.
4.5 Playback
Purpose:
This section explains how to view the video files stored in the network disks or memory
cards.