Network Speed Dome User Manual
50
7.
Check the
Enable Timing Snapshot
checkbox to enable continuous snapshot, and
configure the schedule of timing snapshot. Check the
Enable Event-triggered
Snapshot
checkbox to enable event-triggered snapshot.
8.
Select the format, resolution, quality of the snapshot.
9.
Set the time interval between two snapshots.
10.
Click
to save the settings.
5.1.3
Configuring Net HDD
Before you start:
The network disk should be available within the network and properly configured to
store the recorded files, log files, etc.
Steps:
Add Net HDD
1.
Enter the NAS (Network-Attached Storage) Settings interface:
Configuration >
Storage > Storage Management > Net HDD
Figure 5-7
Select Net HDD Type
2.
Enter the IP address and the file path of the network disk.
3.
Select the mounting type. NFS and SMB/CIFS are selectable. You can set the user
name and password to guarantee the security if SMB/CIFS is selected.
Please refer to the
NAS User Manual
for creating the file path.
For your privacy and to better protect your system against security risks, we
strongly recommend the use of strong passwords for all functions and
network devices. The password should be something of your own choosing
(Using a minimum of 8 characters, including at least three of the following
categories: upper case letters, lower case letters, numbers, and special
characters.) in order to increase the security of your product.
Содержание DS-2DF8836IX-AEL
Страница 1: ...Network Speed Dome User Manual UD 6L0201D2059A02 ...
Страница 143: ...Network Speed Dome User Manual 142 ...
