HIKVISION DS-2DF5284-A Скачать руководство пользователя страница 28 | Manualshive

Страница: 28 / 44

HIKVISION DS-2DF5284-A Скачать руководство пользователя страница 28

User Manual of IR Speed Dome

© Hikvision Digital Technology Co., Ltd. All Rights Reserved.

27

PRESETS

PRESET NUM 1

[UNDEFINED]

PRESET PTZ

CLEAR PRESET

BACK EXIT

Figure 3-12

Preset Configuration Menu

2.

Choose the preset number:
Move the cursor to

PRESET NUM

and click

IRIS+

to enter. Click the up and down buttons to

choose the preset number which needs to be edited.

If the preset has been defined, the preset

label will be listed under the number; if it has not been defined, you will see the information

UNDEFINED

under the number.

Notes:



There are up to 255 presets can be set for the speed dome.



The system-defined presets will be displayed on this submenu and they are not editable.

3.

Set the preset position.
Move the cursor to

PRESET PTZ

and click

IRIS+

to edit the preset position. Use the direction

buttons to move the speed dome to find the desired scene/position, and then press

IRIS+

to

confirm the settings and return to the previous menu, or press

IRIS-

to cancel.

Note:

The preset position settings will be restricted by the limit stops if they are defined.

4.

Call the presets.
You can select the preset number from the drop-down preset list in the control panel of the
encoder through a web browser, and click the arrow to call a user-defined or system-defined
preset.

5.

Clear the preset settings.
Move the cursor to

CLEAR PRESET

and click

IRIS+

to clear the settings of the current preset.

3.4.3

Configuring Patrols

Purpose:

A patrol is a scanning track specified by a group of user-defined presets. You can call a patrol to scan
the scenes automatically among the user-defined presets in sequence.

Steps:

1.

Move the cursor to enter patrol configuration submenu:

MAIN MENU > DOME SETTINGS > PATROLS

/R&DOO

ZZZFFWYLUHODQGLH

VKRS#FFWYLUHODQGLH

«
...
26
27
28
29
30
...
»

Содержание DS-2DF5284-A













































Отзывы:

Нет отзывов