HIKVISION DS-2DF5284-A, Руководство пользователя, Страница: 19 / 44

User Manual of IR Speed Dome
© Hikvision Digital Technology Co., Ltd. All Rights Reserved.
18
surveillance environments, which can be set as ON (normally on), OFF (normally off) or TEM
(change according to the temperature).

IR correction settings
This parameter is to correct the focus problems caused by the IR light. You can turn IR CORRECTION
ON or OFF .
Note: IR correction settings vary according to the different camera models.

Fan Parameter Configuration
You can set the FAN CONTROL as TEMP (controlled by the temperature), ON or OFF .

EIS (Electronic Image Stabilization) Configuration
You can set the EIS FUNCTION as ON or OFF ; and set the EIS LEVEL as 0-3.
Note: The selectable EIS level varies according to the different camera models.

Preset Direct Focus
You can set the preset direct focus function ON/OF on PRESET DFOCUS submenu.

Protocol and RS-485 settings

Select the protocol.
Choose the protocol on PROTO SET submenu. You can configure it as AUTO MATCH, PELCO-P,
PELCO-D, HIKVISION, KALATEL or VICON . When you choose AUTO MATCH , it is protocol
self-adaptive.

Set the protocol status.
Set the PROTOCOL STATUS SET as ON to enable the user-defined protocol.

Enable the RS-485 configuration diagnosis.
You can set 485CHECK SET as ON or AUTO for automatic RS-485 configuration diagnosis. If the
configuration is incorrect, an alert will be received; if you set the value as AUTO , it will
automatically stop the diagnosis when no errors exist.

Power Memory Settings
The dome can resume its previous PTZ status or actions after it restarted from a power-off. You can
set the power memory to 10S, 30S, 60S, 180S, and 300S.
3.3 Configuring Image Parameters
3.3.1 Configuring Camera Parameters
Purpose:
You can set the camera parameters including focus, shutter speed, iris, etc.
Enter the camera parameters settings menu:
/R&DOO ZZZFFWYLUHODQGLH VKRS#FFWYLUHODQGLH