HIKVISION DS-2DF5284-A, Руководство пользователя, Страница: 15 / 44

User Manual of IR Speed Dome
© Hikvision Digital Technology Co., Ltd. All Rights Reserved.
14
SYS INFO
ADDRESS 0
COM FORMAT 2400,8,1
PROTOCOL SELF ADAPTIVE
VERSION 1.00
HARDVERSION 1.00
BUILD DATE 13 04 01
TEMPERATURE 38
℃
BACK EXIT
Figure 3-3 System Information
Notes:

Information on this menu cannot be edited.

The temperature refers to the internal temperature of the speed dome.
3.2.2 Configuring System Parameters
Purpose:
You can check and also edit the system information of software address, baud rate, system time, etc.
on the system information settings menu.
SYS INFO SETTINGS
SOFT ADDRESS 1
SOFT ADDR ACTIVE OFF
SOFT BAUD 2400
SOFT BAUD ACTIVE OFF
BROADCAST ADDRESS ON
PELCO CHECKSUM ON
SYS TIME
BACK EXIT
SYS INFO SETTINGS
ZERO ANGLE
DISPLAY SETTINGS
IR PARAMETER
FAN CONTROL N/A
EIS FUNCTION OFF
EIS LEVEL N/A
PRESET DFOCUS OFF
BACK EXIT
SYS INFO SETTINGS
PROTOCOL STATUS SET OFF
PROTOCOL SET AUTO MATCH
485CHECK SET AUTO
POWER MEMORY 180S
BACK EXIT
Figure 3-4 System Information Settings
Note: You can click the left and right direction buttons in the PTZ control panel via the web browser
of the encoder to enter the next page and return to the previous page of the submenu if more than
one page is available.

Dome address settings
To Set the Soft Address of the Speed Dome
If the SOFT ADDR ACTIVE is set as ON , the soft address is the valid address for connecting the speed
dome. The selectable soft address range is from 1 to 255;
If the
SOFT ADDR ACTIVE is set as OFF , the hard address set by the DIP switch is the valid address of
the speed dome.
Notes:

Before you set the soft address of the speed dome, you need to confirm that it is within the
control range of the control device (e.g. the DVR).
/R&DOO ZZZFFWYLUHODQGLH VKRS#FFWYLUHODQGLH