HIKVISION DS-2DF5284-A, Руководство пользователя, Страница: 12 / 44

User Manual of IR Speed Dome
© Hikvision Digital Technology Co., Ltd. All Rights Reserved.
11
Note: For Manchester code control protocol, the system-defined presets with special functions are
shown as below:
Table 1-1 System-defined Presets of Manchester Code Control Protocol
Set Preset
NO.
Function Call Preset
NO.
Function
65 Remote reboot 67 Auto-flip
66 Access main menu 70 Run Pattern 1
69 Stop recording pattern 71 Run Pattern 2
70 Record Pattern 1 72 Run Pattern 3
71 Record Pattern 2
72 Record Pattern 3
2.4 On-screen Displays
The speed dome supports following on-screen displays:
Zoom Show: Identifies the amount of magnification. The format is ZXXX. XXX is the zoom amount.
PT Show: Displays panning and tilting direction, with the format of NEXXX/TXXX. The NE followed
with XXX indicates the degrees in north east direction, while the T followed with XXX indicates the
degrees in tilt position.
Time Show: Displayed as Day/Month/Year/Day of Week/Hour/Minute. It supports 24-hour time
system.
Preset Show: After you call the configured preset, the preset number is displayed if the lens moves
to the certain place where you’ve set a preset for.
Zone Show : Display the zone title.
Address Show : Display the address of the speed dome.
Error Rate Show: Display the error rate of the speed dome.
Fan and Heat show: Display the heat information of the speed dome.
/R&DOO ZZZFFWYLUHODQGLH VKRS#FFWYLUHODQGLH