HIKVISION DS-2CE16D0T-EXLF, Руководство пользователя, Страница: 8 / 19

Note:
Press and hold the switch button for 5 seconds to
switch the video output. Four kinds of video outputs
are available: TVI, AHD, CVI, and CVBS.
1.2.3 Overview of Type III Camera
Main Body
Switch Button
Power Cord
Video Cable
Set Screw
Base
Enclosure
Figure 1-3 Overview of Type III Camera
Note:
Press and hold the switch button for 5 seconds to
switch the video output. Four kinds of video outputs
are available: TVI, AHD, CVI, and CVBS.
1.2.4 Overview of Type IV Camera
Main Body
Switch Button
Power Cord
Video Cable
Installation Plate
Enclosure
Base
Figure 1-4 Overview of Type IV Camera
Note:
Press and hold the switch button for 5 seconds to
switch the video output. Four kinds of video outputs
are available: TVI, AHD, CVI, and CVBS.
2 Installation
Before you start

Make sure that the device in the package is in good
condition and all the assembly parts are included.

Make sure that all the related equipment is power-off
during the installation.

Check the specification of the products for the
installation environment.

Check whether the power supply is matched with
your power output to avoid damage.

Make sure the wall is strong enough to withstand
three times the weight of the camera and the mount.

If the product does not function properly, contact
your dealer or the nearest service center. DO NOT
disassemble the camera for repair or maintenance by
yourself.
2.1
Installation of Type I & II Camera
2.1.1 Ceiling/Wall Mounting without Junction Box
Steps:
1.
Paste the drill template (supplied) to the installation
location.