HIKVISION DS-2CD6825G0/C-I(V)(S), Руководство пользователя

Страница: 12 / 141

Network Camera User Manual
11
computer with a network cable as shown in Figure 2-1.

Refer to the Figure 2-2 to set network camera over the LAN via a switch or a
router.
半球
Network Cable
or
Network Camera
Computer
Figure 2-1
Connecting Directly
网络交换机
半球
Ne
tw
ork
Ca
ble
Netw
ork C
able
or
or
Network Camera Computer
Figure 2-2
Connecting via a Switch or a Router
2.1.2
Activating the Camera
You are required to activate the camera first by setting a strong password for it before
you can use the camera.
Activation via Web Browser, Activation via SADP, and Activation via Client Software
are all supported.

Activation via Web Browser
Steps:
1.
Power on the camera, and connect the camera to the network.
2.
Input the IP address into the address bar of the web browser, and click Enter to
enter the activation interface.
Notes:

The default IP address of the camera is 192.168.1.64.

The computer and the camera should belong to the same subnet.

For the camera enables the DHCP by default, you need to use the SADP software