User Manual of Network Fisheye Camera
93
Note:
Alarm output settings vary according to the camera model.
5.6.5
Handling Exception
The exception type can be HDD full, HDD error, network disconnected, IP address
conflicted and illegal login to the cameras.
Steps:
1.
Enter the Exception Settings interface:
Configuration > Event > Basic Event > Exception
2.
Check the checkbox to select the linkage method taken for exception. For details,
refer to
Task 3: Set Linkage Method for Motion Detection
in
Section 5.6.1.
Figure 5-51
Exception Settings
3.
Click
Save
to save the settings.
5.6.6
Configuring Line Crossing Detection
Purpose:
Line crossing detection function detects people, vehicle or other objects which cross a
pre-defined virtual line, and some certain actions can be taken when the alarm is
triggered.
Note:
Line Crossing Detection is not supported when the decoding mode is hardware
decoding and the display mode is 4PTZ.
Steps:
1.
Enter the Line Crossing Detection settings interface:
Configuration > Events > Smart Event > Line Crossing Detection
2.
Check the checkbox of
Enable
to enable the function.
