User Manual of Network Fisheye Camera
82
5.
Drag the red rectangle to adjust the position.
6.
Click
Save
to save settings.
Note:
The picture must be in RGB24 bmp format and the maximum picture size is
128*128.
5.5.5
Display Info. on Stream
Check the checkbox of
Enable Dual-VCA
, and the information of the objects (e.g.
human, vehicle, etc.) will be marked in the video stream. Then, you can set rules on
the connected rear-end device to detect the events including line crossing, intrusion,
etc.
Figure 5-43
Display Info. on Stream Setting
5.6
Configuring Event Settings
This section explains how to configure the network camera to respond to alarm events,
including motion detection, video tampering, alarm input, alarm output, exception,
exception detection, intrusion detection, and line crossing detection, etc. These events
can trigger the linkage methods, such as Notify Surveillance Center, Send Email,
Trigger Alarm Output, etc.
Note:
Check the checkbox of
Notify Surveillance Center
if you want to push the
alarm information to the surveillance client such as the mobile phone, computer, etc.,
as soon as the alarm is triggered.
5.6.1
Configuring Motion Detection
Purpose:
