User Manual of Network Fisheye Camera
54
and Multicast Address.
3.
(Optional) Check the checkbox of
Enable Multicast Discovery
, and then the
online network camera can be automatically detected by client software via
private multicast protocol in the LAN.
4.
Configure the DNS server. Input the preferred DNS server, and alternate DNS
server.
5.
Click
Save
to save the settings
.
Notes
:
The valid value range of MTU is 1280 to 1500.
The Multicast sends a stream to the multicast group address and allows multiple
clients to acquire the stream at the same time by requesting a copy from the
multicast group address. Before utilizing this function, you have to enable the
Multicast function of your router.
A reboot is required for the settings to take effect.
5.3.2
Configuring Port Settings
Purpose:
You can set the port No. of the camera, e.g. HTTP port, RTSP port, HTTPS port and
Server Port.
Steps:
1.
Enter the Port Settings interface:
Configuration > Network > Basic Settings > Port
Figure 5-21
Port Settings
