User Manual of Network Fisheye Camera
104
6.2
Configuring Capture Setting
Purpose:
You can configure the scheduled capture and event-triggered capture. The captured
picture can be stored in the SD card (if supported) or in the network disk (For details,
please refer to
Section 6.3
Configuring Net HDD
). The captured pictures can also be
uploaded to a FTP server.
Steps:
1.
Enter
Capture
setting interface:
Configuration > Storage > Schedule Setting
2.
Go to
Capture Schedule
tab to configure the capture schedule by click-and-drag
the mouse on the time bar.
Figure 6-4
Capture Schedule Setting
3.
Click
Save
to save the settings.
4.
Go to
Capture Parameters
tab to configure the capture parameters.
1)
Check the
Enable Timing Snapshot
checkbox to enable continuous capture.
2)
Select the picture format, resolution, quality and capture interval.
3)
Check the
Enable Event-triggered
Snapshot
checkbox to enable
event-triggered capture.
Note:
Select
Upload to FTP/Memory Card/NAS
as the linkage method for
