User Manual of Network Fisheye Camera
100
Chapter 6
Storage Settings
6.1
Configuring Recording Schedule
Purpose:
There are two kinds of recording for the cameras: manual recording and scheduled
recording. For the manual recording, refer to
Section 4.3
Recording and Capturing
Pictures Manually
. In this section, you can follow the instructions to configure the
scheduled recording. By default, the record files of scheduled recording are stored in
the SD card (if supported) or in the network disk.
Steps:
1.
Enter the Record Schedule Settings interface:
Configuration > Storage > Schedule Settings > Record Schedule
Figure 6-1
Recording Schedule Interface
2.
Check the checkbox of
Enable
to enable scheduled recording.
3.
Click
Advanced
to set the camera record parameters, including overwrite,
pre-record, post-record and stream type.
