
Network Camera User Manual
115
6.
Click
Save
to save the settings.
10.1.5
Handling Exception
The exception type can be HDD full, HDD error, network disconnected, IP address
conflicted and illegal login to the cameras.
Steps:
1.
Enter the Exception Settings interface:
Configuration > Event > Basic Event >
Exception
.
2.
Check the checkbox to set the actions taken for the Exception alarm. Refer to
Task 3: Set the Linkage Method for Motion Detection
in
Section 10.1.1.
Exception Settings
3.
Click
Save
to save the settings.
10.1.6
Configuring Other Alarm
Note:
Some certain cameras support Wireless Alarm, PIR (passive infrared sensor)
Alarm or Emergency Alarm.
Wireless Alarm
Purpose:
When wireless alarm signal is sent to the camera from the detector, such as the
wireless door contact, the wireless alarm is triggered and a series of response actions
can be taken.
Steps:
1.
Enter the Wireless Alarm Settings interface:
Содержание DS-2CD2345G0P-I
