HIKVISION DeepinMind Super iDS-96064NXI-I16, Руководство пользователя

Страница: 29 / 199

Network Video Recorder User Manual
27

●
After the device is activated, you should properly keep the password.
●
You can duplicate the password to the IP cameras that are connected with default protocol.
2.3 Configure Unlock Pattern for Login
For the admin user, you can configure the unlock pattern for device login.
Step 1 After the device is activated, you can enter the following interface to configure the device
unlock pattern.
Step 2 Use the mouse to draw a pattern among the 9 dots on the screen. Release the mouse when the
pattern is done.
Figure 2-2 Draw the Pattern

● Connect at least 4 dots to draw the pattern.
●
Each dot can be connected for once only.
Step 3 Draw the same pattern again to confirm it. When the two patterns match, the pattern is
configured successfully.

If the two patterns are different, you must set the pattern again.