-7-
Types of radar
Parameter
Mode N
Mode K、
Mode X（two-lane used）
Mode X
（one lane used）
Mode R
Mode H
Installation Height
（meter）
6
6
6
6
6
6
6
6
6
-
-
-
Trigger distance
（meter）
22
21
20
18
17
16
14
13
12
-
-
-
Installation angle
（degree）
15
16
17
18
19
20
23
25
27
Side loading angle
20°～ 30°
Remarks：It
’
s possible to improve the efficiency of installation during installing the radar of CSR-
I series, with the help of the assistant tool such as radar laser sight, digital protractor and hand-held
grading instrument.
d.
Electrical connection
Refer to “Radar electrical interface” and connect the power line and communication line.
Attention: The power supply can be only electrified after finishing connecting all the cable
and checking without error.
3. The debugging and usage of software
a.
Software introduction
The radar of CSR-I series are all allocated with the debugging software TSRadar2.01. Not
only can it set the all the kinds of parameters of the radar in detail, but also control the working
conditions of radar very easily.
TSRadar2.01 debugging software is developed based on Windows operation system so that it is able to
run in the main current Windows operation system including Window 7
、
Windows XP and so on.
This instruction book takes an example of Windows XP to explain the debugging and usage of
TSRadar2.01 in details.
b.
Usage of the debugging software
1). The surface of the software
It’s divided into “the communication setting area(1)”, “The current speed display area
(2)”, “the main display area(3)”, “the auxiliary display area(4)”. As shown in the figure 2.10:
雷
达
类
