HIKVISION Blazer Pro Series, Быстрый старт

Страница: 19 / 31

Quick Start Guide of Blazer Pro
18
3. In the General Settings interface, you can configure the following settings: Working Mode, NIC Type, IPv4
Address, IPv4 Gateway, MTU and DNS Server.
Working Mode
There are two 10M/100M/1000M NIC cards provided, and it allows the device to work in the Multi-address,
Load Balance and Net-fault Tolerance modes.

Multi-address Mode: The parameters of the two NIC cards can be configured independently. You can
select LAN1, LAN2 in the NIC type field for parameter settings.

Load Balance Mode: You can select one NIC card as default route. And then the system is connecting
with the extranet the data will be forwarded through the default route.

Net-fault Tolerance Mode: The two NIC cards use the same IP address, and you can select the Main
NIC to LAN1, LAN2. By this way, in case of one NIC card failure, the device will automatically enable
another standby NIC card so as to ensure the normal running of the whole system.
If the DHCP server is available, you can click the checkbox of DHCP to automatically obtain an IP address
and other network settings from that server.
Note: The valid value range of MTU is 500 ~ 9676.
4. After having configured the general settings, click Apply button to save the settings.
Accessing Blazer Pro via Web Manager
You can access the Blazer Pro via Web Manager which is a B/S client for management of Blazer Pro.
Notes:

If you have properly set the network parameters for the master board, you can access the video management
system via network. You can also access the system it locally. Here we only introduce the access to the
system locally. For more details, refer to the User Manual of Blazer Pro Web Manager .

For accessing the video management system via network, you should turn video management system’s
firewall off.
Firewall will not help prevent hackers or malicious software from gaining access to your product through
the network after you turn firewall off.

If you cannot access the video management system via network, you can turn your PC’s firewall off and try
again.