HIKVISION AX DS-PWA32-H Скачать руководство пользователя страница 47

Страница: 47 / 121

6. Set the Disconnection Time, and the system determines connection fault if the disconnected

duration of the device is longer than the configured value.

7. Optional: Enable Link to Wireless Card Reader and set the serial No.

Note

The card reader in 868 MHZ may not support this function.

8. Click OK.

Note

• All zones are added to the partition 1 by default

• After the keypad is configured, you can click Status → Keypad to view the keypad status.

4.3.3 Partition Settings

Basic Settings

You can link zones to the selected partition.
Steps

1. Click Partition Management → Basic Settings to enter the page.

Figure 4-19 Partition Basic Information Management Page

2. Select a partition.

3. Check Enable.

4. Check the check box in front of the zone to select zones for the partition.

5. Click Save to complete the settings.

AX Security Control Panel

Содержание AX DS-PWA32-H


























































































































Результаты поиска

Содержание AX DS-PWA32-H

Отзывы:

HIKVISION AX DS-PWA32-H, Руководство пользователя, Страница: 47 / 121

Результаты поиска

Содержание AX DS-PWA32-H

Отзывы: