HIKVISION AX DS-PWA32-H Скачать руководство пользователя страница 108

Страница: 108 / 121

Appendix B. Input Types

Table B-1 Input Types

Input Types

Operations

Instant Zone

The system will immediately alarm when it detects triggering

event after system armed.
Audible Response Trigger the system sound and siren.
Voice Prompt: Zone X alarm.

Perimeter Zone

The system will immediately alarm when it detects triggering

event after system armed.
Audible Response: Trigger the system sound and siren. There is a

configurable interval between alarm and siren output, which

allows you to check the alarm and cancel the siren output during

the interval.
Voice Prompt: Zone X perimeter alarm.

Delayed Zone

The system provides you time to leave through or enter the

defense area without alarm.
Audible Response: Trigger the system sound and siren.
Voice Prompt: Zone X alarm.

Follow Zone

The zone acts as delayed zone when it detects triggering event

during system Entry Delay, while it acts as instant zone

otherwise.
Audible Response: Trigger the system sound and siren.
Voice Prompt: Zone X follow alarm.

24H Silence Zone

The zone activates all the time without any sound/siren output

when alarm occurs.
Audible Response: No system sound (voice prompt or siren).

Panic Zone

The zone activates all the time.
Audible Response: Trigger the system sound and siren.
Voice Prompt: Zone X panic alarm.

Fire Zone

The zone activates all the time with sound/siren output when

alarm occurs.
Audible Response: Trigger the system sound and siren.
Voice Prompt: Zone X fire alarm.

AX Security Control Panel

Содержание AX DS-PWA32-H


























































































































Результаты поиска

Содержание AX DS-PWA32-H

Отзывы:

HIKVISION AX DS-PWA32-H, Руководство пользователя, Страница: 108 / 121

Результаты поиска

Содержание AX DS-PWA32-H

Отзывы: