HIKVISION 7200HFI-SV Series Скачать руководство пользователя страница 71

Страница: 71 / 254

User Manual of Digital Video Recorder

Figure 5. 23

Alarm Settings for DVR Series

Figure 5. 24

Alarm Settings for HDVR Series

Note:

IP Camera

is supported by HDVR series only.

Check the checkbox

to choose the alarm triggered recording/capture channel.

Click

to save settings.

Click

to back to the upper level menu.

Click

in the Alarm Input interface to save the settings.

Repeat the above steps to configure other alarm input parameters.

If the setting can also be applied to other alarm inputs, click

and choose the alarm input number.

Figure 5. 25

Copy Alarm Input

Enter Record/Capture Schedule settings interface (Menu> Record> Schedule>Record/Capture

Schedule). For detailed information about record schedule settings, refer to step 2 in

Chapter 5.2

Configuring Record/Capture Schedule.

Note:

You need to select the

Type

as Alarm in record schedule settings.

Содержание 7200HFI-SV Series































































































































































































































































Результаты поиска

Содержание 7200HFI-SV Series

Отзывы:

HIKVISION 7200HFI-SV Series, Руководство пользователя, Страница: 71 / 254

Результаты поиска

Содержание 7200HFI-SV Series

Отзывы: