HIKVISION 7200HFI-SV Series Скачать руководство пользователя страница 26

Страница: 26 / 254

User Manual of Digital Video Recorder

1.6

Starting Up and Shutting Down the Device

Purpose:

Proper startup and shutdown procedures are crucial to expanding the life of the device.

Before you start:

Check that the voltage of the extra power supply is the same with the device’s requirement, and the ground

connection is working properly.

Starting up the device:

Steps (for 7200 & 7600 series):

Check the power supply is plugged into an electrical outlet. It is HIGHLY recommended that an

Uninterruptible Power Supply (UPS) be used in conjunction with the device.

Press the POWER button on the rear panel. The Power indicator LED should turn green indicating that the

device begins to start up.

After startup, the Power indicator LED is solid green. A splash screen with the status of the HDD appears

on the monitor. The row of icons at the bottom of the screen shows the HDD status. ‘X’ means that the

HDD is not installed or cannot be detected.

Steps (for other series):

Check the power supply is plugged into an electrical outlet. It is HIGHLY recommended that an

Uninterruptible Power Supply (UPS) be used in conjunction with the device.

Turn on the Power Switch on the rear panel and press the

POWER

button on the front panel. The Power

indicator LED should turn blue indicating that the device begins to start up.

After startup, the Power indicator LED is solid blue. A splash screen with the status of the HDD appears

on the monitor. The row of icons at the bottom of the screen shows the HDD status. ‘X’ means that the

HDD is not installed or cannot be detected.

Shutting down the device:

Steps:

There are two proper ways to shut down the device.

• Task 1: Standard shutdown

Enter the Shutdown menu.

Menu > Shutdown

Figure 1. 7

Shutdown Menu

Click the

Shutdown

button.

Click the

Yes

button.

Содержание 7200HFI-SV Series































































































































































































































































Результаты поиска

Содержание 7200HFI-SV Series

Отзывы:

HIKVISION 7200HFI-SV Series, Руководство пользователя, Страница: 26 / 254

Результаты поиска

Содержание 7200HFI-SV Series

Отзывы: