HIKVISION 7200HFI-SV Series Скачать руководство пользователя страница 245

Страница: 245 / 254

User Manual of Digital Video Recorder

244



No record file found in the device local HDD, and the prompt “No record file found” pops up when you
search the record files.

Possible Reasons:

The time setting of system is incorrect.

The search condition is incorrect.

The HDD is error or not detected.

Steps:

Verify the system time setting is correct.

Select “Menu > Configuration > General > General”, and verify the “Device Time” is correct.

Verify the search condition is correct.

Select “Playback”, and verify the channel and time are correct.

Verify the HDD status is normal.

Select “Menu > HDD > General” to view the HDD status, and verify the HDD is detected and can be

read and written normally.

Check if the fault is solved by the above steps.

If it is solved, finish the process.

If not, please contact the engineer from our company to do the further process.

Содержание 7200HFI-SV Series































































































































































































































































Результаты поиска

Содержание 7200HFI-SV Series

Отзывы:

HIKVISION 7200HFI-SV Series, Руководство пользователя, Страница: 245 / 254

Результаты поиска

Содержание 7200HFI-SV Series

Отзывы: