HIKVISION 7200HFI-SV Series Скачать руководство пользователя страница 209

Страница: 209 / 254

User Manual of Digital Video Recorder

208

12.1

Configuring OSD Settings

Purpose:

You can configure the OSD (On-screen Display) settings for the camera, including date /time, camera name, etc.

Note:

We use the interface of DS-9100HFI-ST series (unless otherwise stated) as example to describe the

following settings.

Steps:

Enter the OSD Configuration interface.

Menu > Camera > OSD

Select the camera to configure OSD settings.

Edit the Camera Name in the text field.

Configure the Display Name, Display Date and Display Week by checking the checkbox.

Select the Date Format, Time Format and Display Mode.

Figure 12. 1

OSD Configuration Interface

You can use the mouse to click and drag the text frame on the preview window to adjust the OSD position.

Copy Camera Settings

If you want to copy the OSD settings of the current camera to other cameras, click

to enter

the Copy Camera interface.

Figure 12. 2

Copy Settings to Other Cameras

Содержание 7200HFI-SV Series































































































































































































































































Результаты поиска

Содержание 7200HFI-SV Series

Отзывы:

HIKVISION 7200HFI-SV Series, Руководство пользователя, Страница: 209 / 254

Результаты поиска

Содержание 7200HFI-SV Series

Отзывы: