HIKVISION 7200HFI-SV Series Скачать руководство пользователя страница 178

Страница: 178 / 254

User Manual of Digital Video Recorder

177

10.2

Rebuilding Array

Purpose:

The working status of array includes Functional, Degraded and Offline. By viewing the array status, you can take

immediate and proper maintenance for the disks so as to ensure the high security and reliability of the data stored

in the disk array.

When there is no disk loss in the array, the working status of array will change to Functional; when the number of

lost disks has exceeded the limit, the working status of array will change to Offline; in other conditions, the

working status is Degraded.

When the virtual disk is in Degraded status, you can restore it to Functional by array rebuilding.

10.2.1

Automatically Rebuilding Array

Purpose:

When the virtual disk is in Degraded status, the device can start rebuilding the array automatically with the hot

spare disk to ensure the high security and reliability of the data.

Before you start:

Enable the

Auto-rebuild

in Firmware Settings interface (Menu>HDD>RAID>Firmware) and the hot spare disk has

been configured.

Steps:

Enter the Array Settings interface. The status of the array is Disk Loss. Since the hot spare disk is configured

and

Auto-rebuild

function is enabled. The hot spare disk will be automatically used for array rebuilding.

Menu > HDD > RAID > Array

Figure 10. 16

Array Settings Interface

Enter the Virtual Disk interface to view the rebuilding status of the virtual disk.

Menu>HDD>RAID>Virtual Disk

Figure 10. 17

Virtual Disk Settings Interface

Note:

If there is no hot spare disk after rebuilding, it is recommended to install a HDD into the device and set is as

a hot spare disk to ensure the high security and reliability of the array. For detailed operation guide, please refer to

Содержание 7200HFI-SV Series































































































































































































































































Результаты поиска

Содержание 7200HFI-SV Series

Отзывы:

HIKVISION 7200HFI-SV Series, Руководство пользователя, Страница: 178 / 254

Результаты поиска

Содержание 7200HFI-SV Series

Отзывы: