HIKVISION 7200HFI-SV Series Скачать руководство пользователя страница 128

Страница: 128 / 254

User Manual of Digital Video Recorder

127

Select a record file in the backup device and click

to play it.

Click

to format the backup device. Two kinds of file system can be configurable,

including FAT32 and NTFS.

Note:

If the inserted USB device is not recognized:

•

Click

•

Reconnect device.

•

Check for compatibility from vendor.

Figure 7. 36

USB Flash Drive Management

Management of USB writers and DVD-R/W

Enter Search Result interface of record files.

Menu>Export>Normal

Set search condition and click

to enter Search Result interface.

Note:

At least one channel shall be selected.

Figure 7. 37

Normal Video Search for Backup

Select record files you want to back up.

Click

to enter Export interface.

Note:

At least one record file shall be selected.

Содержание 7200HFI-SV Series































































































































































































































































Результаты поиска

Содержание 7200HFI-SV Series

Отзывы:

HIKVISION 7200HFI-SV Series, Руководство пользователя, Страница: 128 / 254

Результаты поиска

Содержание 7200HFI-SV Series

Отзывы: