HIKVISION 7200HFI-SV Series Скачать руководство пользователя страница 110

Страница: 110 / 254

User Manual of Digital Video Recorder

109

7.1

Backing up Record Files

Before you start:

Please insert the backup device(s) into the device.

7.1.1

Quick Export

Purpose:

Export record files to backup device(s) quickly.

Note:

We use the interface of DS-9100HFI-ST series (unless otherwise stated) as example to describe the

following settings.

Steps:

Enter Video Export interface.

Menu>Export>Normal

Choose the channel(s) you want to back up and click

Note:

The time duration of record files on a specified channel cannot exceed one day. Otherwise, the

message box “Max. 24 hours are allowed for quick export.” will pop up.

Figure 7. 1

Quick Export Interface for DVR Series

Export.

Go to Export interface, choose backup device and click

to start exporting.

Note:

Here we use USB Flash Drive and please refer to

Chapter 7.1.2 Backing up by Normal Video

Search

for more backup devices supported by the device.

Содержание 7200HFI-SV Series































































































































































































































































Результаты поиска

Содержание 7200HFI-SV Series

Отзывы:

HIKVISION 7200HFI-SV Series, Руководство пользователя, Страница: 110 / 254

Результаты поиска

Содержание 7200HFI-SV Series

Отзывы: