HIKVISION 114-029, Руководство пользователя, Страница: 80 / 190

Network Camera User Manual
79
If you select Platform Access Mode as Hik-Connect,
1)
Click and read "Terms of Service" and "Privacy Policy" in pop-up window.
2)
Create a verification code or change the verification code for the camera.
Note:
•
The verification code is required when you add the camera to Hik-Connect
app.
•
For more information about the Hik-Connect app, refer to Hik-Connect
Mobile Client User Manual.
4.
You can use the default server address. Or you can check the Custom checkbox
on the right and input a desired server address.
5.
Click Save to save the settings.
Wireless Dial
Purpose:
Data stream of audio, video and image can be transferred via 3G/4G wireless
network.
Notes:
•
The wireless dial function may not be supported by some camera models.
•
Camera that supports wireless dial does not support PPPoE.
Steps:
1.
Click Wireless Dial tab to enter the Wireless Dial configuration interface:
Configuration > Network > Advanced Settings > Wireless Dial
2.
Check the checkbox to enable the wireless dial settings.
3.
Configure the dial parameters.
1)
Select the dial mode from the drop-down list. Auto and Manual are selectable.
If Auto is selected, you can set the arming schedule for dialing; If Manual is
selected, you can set the offline time and manual dialing parameters.
2)
Set the access number, user name, password, APN, MTU and verification
protocol. You can also leave these parameters blank, and the device will