HikRobot MV-CL042-91CC, Руководство пользователя

Страница: 99 / 120

Camera Link Line Scan Camera
·
User Manual
90
Appendix Serial Communication Command List
The commands listed below are common ones only. For other commands, please contact technical
support personnel via e-mail: tech_support@hikrobotics.com for detailed information.
Table Appendix-1 Command List
Parameter Command Value Description
DeviceUserID r DeviceUserID Read customized name.
DeviceReset w DeviceReset 1 Reboot device. E.g., w
DeviceReset 1.
DeviceClockSelector r DeviceClockSelector 0—CameraLink Select the clock frequency
to access from the device.
DeviceClockFrequen
cy w DeviceClockFrequency
x 0—85 M
1—70 M
2—60 M
3—40 M
Set the clock frequency.
E.g., w
DeviceClockFrequency 1.
r DeviceClockFrequency Read the clock frequency.
Width w Width x Value Set width. E.g., w Width
4096.
r Width Read width.
Height w Height Value Set the height. E.g., w
Height 2000.
r Height Read the height.
OffsetX w OffsetX x Value Set horizontal offset from
the origin to the region of
interest (in pixels).
E.g., w OffsetX 200.
r OffsetX Read horizontal offset
from the origin to the
region of interest (in
pixels).
OffsetY w OffsetY x Value Set vertical offset from the
origin to the region of
interest (in pixels).
E.g., w OffsetY 200.