CameraLink Area Scan Camera
·
User Manual
62
8.17 Set LUT
A Look-Up Table (LUT) is a customized grayscale-mapping table. You can stretch, amplify the
grayscale range that interests you. The mapping can be linear or customized curve. You can set LUT
as shown below.
Steps:
1.
Click LUT Control.
2.
Enable LUT Enable.
3.
Enter proper value in LUT Index according to actual demands, and its range is from 0 to 1023.
4.
Enter proper value in LUT Value according to actual demands, and its range is from 0 to 4095.
Figure 8-25
Set LUT
You cannot use Gamma correction function and LUT function at the same time.
In the format of Bayer, the color camera does not have LUT function.
8.18 Set Shading Correction
The shading correction function is used to improve the image uniformity when you acquire a
non-uniformity image due to external conditions.
Some models of the camera support shading correction function. For detailed information, please
refer to the camera you got.
Steps:
1.
Click Shading Correction.
2.
Select NUFFC Correction as Shading Selector.
3.
Click Execute in Activate Shading.
