7
English
Hex. drive size
kg
Weight
(According to EPTA-Procedure 01/2014)
Disconnect the battery
Switching ON
Switching OFF
Clockwise rotation
Counterclockwise rotation
Tightening mode selector switch
Lights ; Soft mode “Normal work”
Tightening short screws, A
ffi
xing plasterboard,
etc.
Lights ; “Heavy load work”
Tightening long screws, coach screws, bolts,
etc.
Lights ;
Self drilling screw tightening
Battery
Remaining battery indicator switch
Lights ;
The battery remaining power is over 75%
Lights ;
The battery remaining power is 50% – 75%.
Lights ;
The battery remaining power is 25% – 50%.
Lights ;
The battery remaining power is less than 25%
Blinks ;
The battery remaining power is nearly empty.
Recharge the battery soonest possible.
Blinks ;
Output suspended due to high temperature.
Remove the battery from the tool and allow it to
fully cool down.
Blinks ;
Output suspended due to failure or malfunction.
The problem may be the battery so please
contact your dealer.
NOTE
To prevent the battery power consumption caused by
forgetting to turn o
ff
the LED light, the light goes o
ff
automatically in about 3 seconds.
STANDARD ACCESSORIES
In addition to the main unit (1), the package contains the
accessories listed on page 89.
Standard accessories are subject to change without notice.
APPLICATIONS
○
Driving and removing of machine screws, wood screws,
tapping screws, etc.
SPECIFICATIONS
The speci
fi
cations of this machine are listed in the table on
page 88.
* According to EPTA-Procedure 01/2014
Depending on attached battery.
NOTE
Due to HiKOKI’s continuing program of research and
development, the speci
fi
cations herein are subject to
change without prior notice.
CHARGING
Before using the power tool, charge the battery as follows.
1. Connect the charger’s power cord to the receptacle.
When connecting the plug of the charger to a receptacle,
the pilot lamp will blink in red (At 1- second intervals).
2. Insert the battery into the charger.
Firmly insert the battery into the charger as shown in
Fig. 3
(on page 2).
3. Charging
When inserting a battery in the charger, charging will
commence and the pilot lamp will light continuously in
red.
When the battery becomes fully recharged, the pilot lamp
will blink in red. (At 1-second intervals) (See
Table 1
)
●
Pilot lamp indication
The indications of the pilot lamp will be as shown in
Table 1
, according to the condition of the charger or the
rechargeable battery.
00Book̲WH12DD.indb 7
00Book̲WH12DD.indb 7
2018/12/05 11:33:01
2018/12/05 11:33:01
Содержание WH 12DD
Страница 3: ...3 7 8 9 10 00Book WH12DD indb 3 00Book WH12DD indb 3 2018 12 05 11 33 01 2018 12 05 11 33 01...
Страница 92: ...92 1 2 3 4 5 00Book WH12DD indb 92 00Book WH12DD indb 92 2018 12 05 11 33 16 2018 12 05 11 33 16...
Страница 94: ...94 00Book WH12DD indb 94 00Book WH12DD indb 94 2018 12 05 11 33 16 2018 12 05 11 33 16...