For information on Care and Cleaning or to register your
SEQUOIA
PROFESSIONAL
product by highwood , please visit
www.highwood-usa.com
.
SEQUOIA
PROFESSIONAL
by
high
wood
PERGOLA ASSEMBLY
PAGE 6 of 16
7) Stand the Arch Assembly Up and Move to the Desired
Location. If a Specific Orientation is Desired, Measure
from Each Post to the Edge of an Adjacent Surface or
Structure, Making Adjustments to Each Post as Needed to
Achieve Equal Measurements. This Will Ensure the
Pergola is Square with the Surface it Sits on, such as a
Patio or Deck. Space the Bottoms of the Posts to Ensure
the Spacing Shown Below.
8) Once the Arch is in the Desired Location, Support
or Add Braces to Hold it Upright While it is Anchored
to the Ground. Using Anchors (not included)
Appropriate for the Anchoring Surface, Secure the
Arch Using (2) Anchors in Each Metal Angle Bracket
"F". The Brackets will Support Up to a
5
16
" Diameter
Anchor.
CM-PGLA-1212
04.30.21
Important!
Use a Level to
Ensure Each Post is
Plumb in Both
Directions Before
Anchoring them to
the Ground.
Post
Level
113 5/8"
X
X
