34
2.
Extract the contents of the file.
3.
Refer to the readme (if included) to make sure you have the correct firmware for
your HBA
Note
:
Your HBA name and properties can be found in the
WebGUI
>
Physical Tab
.
4.
Locate the proper firmware file
5.
Login to WebGUI, then click the Physical tab.
6.
Under
Update Firmware
, click
Browse
and browse to your firmware file.
7.
Click
Submit.
8.
Reboot
for changes to take effect.
Updating BIOS/Firmware using a bootable USB
Create a bootable USB using a utility such as Rufus.
Caution
: Creating a bootable USB
will erase all previous data stored on it.
1.
Download the latest BIOS/Firmware file found at
2.
Extract the file contents onto the bootable USB
3.
Read the README for instructions on how to flash the BIOS onto your hardware.
4.
Reboot your computer into DOS mode by:
•
Setting boot priority to the bootable USB
•
Removing all bootable drives (OS, CD Drives) from motherboard and leaving
only the bootable USB and RocketRAID card plugged in
5.
Once in DOS mode, you should see a command line interface
Figure. Bootable USB formatted with Rufus Utility, FreeDOS CLI (Command Line Interface)
6.
Type in the command you found in the README (ex. load.exe <filename>
7.
Reboot