INSTALLATION OF THE ANCHOR
RAFA
ROOF ACCESS FAST ANCHOR
1.a 1.b 1.c
2.a 2. b 2. c 2. d
1. Start with a folded RAFA
1.
2. Press the leg buttons (1) in order to
change the leg’s angle to the desired
position. Start with the rear leg to set an
“L” anchor (1.a) , clamp (1.b) or “L” with a
supportive leg (1.c)
3. Press the slider button (2) in order to
extend the length of the anchor . You can
get an extended “L” anchor (2.a), an
extended “L anchor with a supportive leg
(2.b), an extended clamp (2.c) or an
extended clamp with angles to avoid
large edges or surfacing (2.d)
2.
4. Press the leg handle down (3) to lock
the anchor firmly in a clamp position
3.
GENERAL INSTRUCTIONS:
- Use only standard gear, checked by a certified person
- Use the product only after
proper training from a
certified guide.
- Do not use the product without reading the
instructions.
- Check the product functionality before every use. If
there is any doubt, do not use it until consulting with
the manufacturer
.
RAFA PARTS
CONNECTION EYE
LEG BUTTON
FRONT LEG
LEG JOINT
SLIDER BUTTON
LEG HANDLE
SLIDER BEAM
REAR LEG
