Вы можете легко установить ремень Highland Highland Tec/Rec Harness, следуя инструкциям в руководстве. Бесплатно загрузите руководство пользователя на нашем сайте manualshive.com, чтобы узнать, как правильно использовать этот продукт для дайвинга.
Installing the Highland Tec/Rec
Harness on the Highland Backplate
Страница 1: ...Installing the Highland Tec Rec Harness on the Highland Backplate ...
Страница 2: ...g tight Be sure to keep the alignment between the grommet and the center bolt hole Fig 2a 2b 3 Install shoulder D rings Using a 3 bar slide install a D ring on each shoulder approximately 10 12 in 25 30 cm down from the plate Fig 3 Final position ing of the hardware occurs at the end of the process 4 Leaving an estimated amount of room for your shoulders bring the webbing straight down towards the...
Страница 3: ...ch strap Position the SS adjuster with the bridge facing up Pass the webbing through the large slot under the bridge and out the narrow slot Pass the webbing through the lower 2 in 5 cm slot from back of plate to front of plate Run the webbing back through the narrow slot of the adjuster under the bridge and then out the large slot Fig 7 8 Try on the harness with your exposure suit Adjust to your ...
Страница 4: ...www highlandscuba com RM0285 rev 18A ...