High End Systems Studio Command 1200 Скачать руководство пользователя страница 51

Страница: 51 / 108

CHAPTER 3

The Menu System

Studio Command Series User Manual

Viewing the Number of Current Lamp Strikes (L/ST)

This option is functional for Studio Command 1200/700 fixtures only. To view the number of
times the fixture has attempted to strike the current lamp:

1. Press and hold <Menu> until AddR appears on the LED display.

2. Scroll to the INFO menu. Press <Enter> to select.

3. Scroll to the L/ST option.

4. Press <Enter>. The LED will display the number of times the fixture has struck the

current lamp.

Note:

Lamp strikes are automatically reset when the lamp hours are reset

(see Resetting Lamp Hours (L/RS) (Studio Command 1200/700 models

only) on page 40).

Viewing the Current Lamp Hours (L/HR)

This option is functional for Studio Command 1200/700 fixtures only. To view the number of
hours the current lamp has been on:

1. Press and hold <Menu> until AddR appears on the LED display.

2. Scroll to the INFO menu. Press <Enter> to select.

3. Scroll to the L/HR option.

4. Press <Enter>. The LED will display the number of hours the current lamp has

been on.

Viewing the Current Software Version (VER)

To view the current software version:

1. Press and hold <Menu> until AddR appears on the LED display.

2. Scroll to the INFO menu. Press <Enter> to select.

3. Scroll to the VER option.

4. Press <Enter>. The LED will display the fixture’s current software version.

Note:

The software version is also displayed when you exit the menu system

(see Alphanumeric Display Error Messages on page 63).

Содержание Studio Command 1200













































































































Результаты поиска

Содержание Studio Command 1200

Отзывы:

Похожие инструкции для Studio Command 1200

Бренды по названию

Популярные бренды

High End Systems Studio Command 1200, Руководство пользователя

Результаты поиска

Содержание Studio Command 1200

Отзывы:

Похожие инструкции для Studio Command 1200

Бренды по названию

Популярные бренды