High End Systems Studio Command 1200, Руководство пользователя

Страница: 45 / 108

CHAPTER 3
The Menu System
Studio Command Series User Manual 35
Testing the LED Display (DISP)
To test the alphanumeric LED display:
1. Press and hold <Menu> until AddR appears on the LED display.
2. Scroll to the TEST menu. Press <Enter> to select.
3. Scroll to the DISP option. Press <Enter> to select. The alphanumeric display runs
through its self test.
4. Press <Menu> to exit the test.
Changing Encoder Operation (ENCD)
This menu option to disable the encoders which work to automatically correct the fixture’s pan
and tilt position if the fixture is moved from its programmed position. Use this option when
performing maintenance, to prevent the fixture from repeatedly trying to correct its position.
To enable/disable the encoders:
1. Press and hold <Menu> until AddR appears on the LED display.
2. Scroll to the TEST menu. Press <Enter> to select.
3. Scroll to the ENCD option. Press <Enter> to select.
4.
or
Scroll to ON to enable the encoders, or OFF to disable the encoders.
5. Press <Enter> to store.