BG-1000.4
BG-1600.4
BG-1300.1D
BG-1900.1D
BG-2200.1D
BG-2500.1D
BG-3300.1D
60A
100A
50A x 2
60A x 2
External 150A
External 200A
External 250A
Place terminal in a secure
position so that it won’t
accidentally contact the
negative battery post
Power cable size
and fusing
It is critical to use the proper power
and ground cable. Select the size
Always use high quality copper
cable. Visit our website for multi amp
system cable recommendations.
Be sure to use the proper fuse size
for each model. Some models require
an external fuse.
Properly route power,
speaker and RCA cables
through the vehicle.
Choose a mounting location
that will provide adequate air
a secure surface. Do not mount
Attach the chassis ground
negative terminal. It is
important to make sure this
connection is very tight.
Bare metal
Attach the main power cable
cable must run directly to
the battery and be properly
fused and be very tight.
Attach the remote turn on
output of the source unit.
Connect the RCA cables to
the INPUT connectors. The
OUTPUT can be used to
provide input for a second
Connect the power cable to the
positive battery terminal. The
power cable must be fused
within 18 inches of the battery
terminal.
Re-connect the negative
battery terminal making sure it
is securely tightened.
Connect the speaker cables to
the speaker output connectors.
Follow the diagram below
The chassis ground connection
is critical to the performance
location that is close to the
away the paint and use a nut
and bolt if possible.
DO NOT USE AN EXISTING
FACTORY BOLT!
Disconnect
negative battery
terminal
Run Cables
Negative Power
Connection
Positive Power
Connection
Remote Turn-on
Connection
Signal Input
Connection
Positive Battery
Connection
Re-connect
Negative Battery
Terminal
Speaker
Connections
Chassis Ground
Be prepared to disarm your vehicle’s alarm and
to enter your radio / source unit code.
Stereo
Installation
Before you start
Monoblock
single woofer
Monoblock
multiple woofers
Bridged
CAUTION
Many new and factory radios require a reset code when
disconnected from battery power. This is an anti-theft
feature. Before unplugging power, you must determine if
your radio/source unit requires a reset code. Check the
operation manual for your vehicle or contact the dealer.
1
2
3
5
7
6
8
11
12
10
4
SPEAKER
LEFT
RIGHT
BRIDGED
OUTPUT
SPEAKER
LEFT
RIGHT
BRIDGED
OUTPUT
SPEAKER
LEFT
RIGHT
CH1/2
CH3/4
BRIDGED
OUTPUT
SPEAKER
LEFT
BRIDGED
SPEAKER
CH 1
BRIDGED
CH 3
BRIDGED
SPEAKER
CH 3
BRIDGED
SPEAKER
CH 1
CH 2
CH 3
SPEAKER
OUTPUT
SPEAKER
OUTPUT
SPEAKER
LEFT
RIGHT
BRIDGED
OUTPUT
SPEAKER
LEFT
RIGHT
BRIDGED
OUTPUT
SPEAKER
LEFT
RIGHT
BRIDGED
OUTPUT
SPEAKER
LEFT
RIGHT
CH1/2
CH3/4
CH3/4
BRIDGED
OUTPUT
SPEAKER
LEFT
RIGHT
BRIDGED
Speakers
Subwoofer
OUTPUT
SPEAKER
CH 1
CH 2
BRIDGED
CH 3
CH 4
BRIDGED
OUTPUT
SPEAKER
OUTPUT
CH 3
CH 4
BRIDGED
SPEAKER
OUTPUT
CH 1
CH 2
SPEAKER
OUTPUT
CH 3
CH 4
SPEAKER
OUTPUT
CH 5
SPEAKER
OUTPUT
SPEAKER
OUTPUT
SPEAKER
OUTPUT
SPEAKER
OUTPUT
SPEAKER
LEFT
RIGHT
BRIDGED
OUTPUT
BRIDGED
SPEAKER
LEFT
RIGHT
BRIDGED
OUTPUT
LEFT
RIGHT
CH1/2
CH3/4
BRIDGED
LEFT
RIGHT
BRIDGED
SPEAKER
CH 1
CH 2
BRIDGED
CH 3
CH 4
BRIDGED
OUTPUT
SPEAKER
OUTPUT
CH 3
CH 4
BRIDGED
SPEAKER
OUTPUT
SPEAKER
LEFT
RIGHT
BRIDGED
OUTPUT
SPEAKER
OUTPUT
SPEAKER
OUTPUT
SPEAKER
OUTPUT
SPEAKER
OUTPUT
SPEAKER
OUTPUT
SPEAKER
OUTPUT
SPEAKER
LEFT
RIGHT
BRIDGED
OUTPUT
SPEAKER
LEFT
RIGHT
BRIDGED
OUTPUT
SPEAKER
LEFT
RIGHT
BRIDGED
OUTPUT
SPEAKER
LEFT
RIGHT
CH1/2
CH3/4
CH3/4
BRIDGED
OUTPUT
SPEAKER
LEFT
RIGHT
BRIDGED
OUTPUT
SPEAKER
CH 1
CH 2
BRIDGED
CH 3
CH 4
BRIDGED
OUTPUT
SPEAKER
OUTPUT
CH 3
CH 4
BRIDGED
SPEAKER
OUTPUT
CH 1
CH 2
CH 4
CH 5
Turn the LEVEL control completely
counter-clockwise to minimum.
Level Control
9
9V
0.2V
INPUT
LEVEL
6V
0.2V
INPUT
LEVEL
PHASE
15
35Hz
SUBSONIC
10
40Hz
SUBSONIC
LPF
LPF
LPF
FULL
LP
HP
XOVER
MONO STEREO
MODE
XOVER
MODE
Model Fuse Size Cable Size
4ga
