manualshive.com logo in svg

HID FARGO DTC 5500LMX, Руководство пользователя

Поделиться
Скачать
HID FARGO DTC 5500LMX Скачать руководство пользователя страница 5

Chapter 

1

May 2017

PLT-02496, Version: 1.2

Specifications

The purpose of this section is to provide specific information on the Regulatory Compliances, Agency 
Listings, Technical Specifications and Functional Specifications for the HDP5500LMX Card Printer.

1.1

Regulatory Compliance

1.1.1

Agency Listings

Agency

Regulatory Compliance

UL

The Card Printer is listed under UL 60950-1 (2

nd

 edition) Information Technology Equipment.

File Number:

 E145118

CSA

The printer manufacturer has been authorized by UL to represent the Card Printer as CSA 
Certified under CSA Standard C22.2 No. 60950-1-07 2

nd

 edition

File Number:

 E145118

FCC

The Card Printer complies with the requirements in Part 15 of the FCC rules for a Class A digital 
device. 

CE

The Card Printer has been tested and complies with EN300-330-1, EN300-330-2, EN301-489-
1, EN60950-1:2006 + A11:2009

Note

: Based on the above testing, the printer manufacturer certifies that the card printer 

complies with the following of the European Community and has placed the CE mark on the 
Card Printer.
LVD 2006/95/EC, EMC 2004/108/EC, R&TTE 1999/5/EC, ROHS 2011/65/EU

Agency

Listing

Emissions and 
Immunity Standards

FCC Part 15 Class A, RSS-GEN, RSS 210, CNS 13438, EN55022 Class A, EN55024, 
EN6100-3-2, EN6100-3-3, EN300-330-1, EN300-330-2, EN301-489-1, EN301-489-3, 
GB9254, GB17625

Safety Standards

UL IEC 60950-1 (2

nd

 edition), CSA C22.2 No. 60950-1-07 (2

nd

 edition), EN60950-1, 

GB4943, CNS14336

Additional Agency 
Listings

CCC, BSMI, KC

Содержание FARGO DTC 5500LMX











































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды